Pre-soldered Wireless Corne MX Keyboard – Hotswappable 42 / 36 Keys Bluetooth Split Keyboard Crkbd

USD $227.00

36 / 42 keys
Built for wireless usage
On board battery connectors and power switches with improved orientation – easy to plug / unplug the battery even after the case and cover are assembled
Socketed controllers and displays – allowing thicker and larger capacity batteries placing under the controllers
Using power saving components
Hotswap MX sockets – changing 3-pin or 5-pin MX key switches whenever you want
Pre-flashed ZMK firmware

Recommended Battery & Display Installation: https://s.beekeeb.com/wcrguide

Number Of Keys: No selection

Display: No selection

Key Switch: No selection

Keycap: No selection

Switch Plate / Top Plate: No selection

Bottom 3D Printed Case: No selection

Clear

All the components will be soldered to the PCB, including Bluetooth Controller, (optional) Sharp Memory-in-Pixel display, diodes, MX hotswap sockets, battery sockets, power switches and reset buttons.
Controller and display are socketed.
Pre-flashed ZMK firmware

Because I cannot ship batteries, please buy a pair of 301230 or 401230 batteries with JST-PH connectors and correct polarity from local stores.
This Corne variants doesn’t support RGB LEDs.
It is a wireless keyboard and cannot be used as wired keyboard.
To configure the keymap, you will need to compile your own ZMK firmware using command line tools or GitHub Actions.
The case and keycaps require DIY assembly by hand and a screwdriver.

Additional information

Switch	MX
Number Of Keys	36 Keys, 42 Keys
Display	No Display, Sharp Memory-in-Pixel Display
Key Switch	No Key Switches, MX Gateron Clear (Linear), MX Gateron G Pro Yellow 3.0 (Linear), MX Kailh Box White (Clicky), MX Cherry RGB Red, MX Cherry RGB Blue, MX Cherry RGB Brown, TTC Frozen Silent V2 (Quiet Linear)
Keycap	No Keycaps, DSA Blank Black, XDA Blank White, Keycap Set 1 – Vintage, Keycap Set 2 – Snow
Switch Plate / Top Plate	No Top Plate, Carbon Fiber, 3D Printed Black, 3D Printed White, 3D Printed Red, 3D Printed Navy Blue, 3D Printed Baby Blue, 3D Printed Neon Yellow, 3D Printed Honey Yellow, 3D Printed Limed Ash Green
Bottom 3D Printed Case	No Bottom Case, 3D Printed Black, 3D Printed White, 3D Printed Red, 3D Printed Navy Blue, 3D Printed Baby Blue, 3D Printed Neon Yellow, 3D Printed Honey Yellow, 3D Printed Limed Ash Green

There are no reviews yet.

Be the first to review “Pre-soldered Wireless Corne MX Keyboard – Hotswappable 42 / 36 Keys Bluetooth Split Keyboard Crkbd”